Thickness Tester CG104

Extech CG104: Coating Thickness Tester

Measures the thickness of ferrous and non-ferrous substrates

The Extech CG104 Coating Thickness Tester, from Agile Microsys, is an easy-to-use device for accurately measuring coatings on both ferrous and non-ferrous surfaces. It uses magnetic induction for ferrous substrates and eddy current for non-ferrous ones, ensuring precise results. The CG104 offers a 1μm resolution, can store 255 measurements, and features an easy-to-read reversible LCD display. With auto-hold, audible alarms, and included calibration standards, it’s ideal for various applications.

Request Info

Features

  • Dual Technology provides automatic recognition of ferrous (iron and steel) and non-ferrous (copper, aluminum, zinc, bronze, brass, etc) substrates
  • Magnetic induction for ferrous substrates
  • Eddy current measurement for non-ferrous substrates
  • 180° reversible LCD display with LED backlight
  • Store/recall up to 255 measurements
  • Audible high/low limit alarms
  • Substrate Zeroing and two-point calibration function
  • Record/Recall Min/Max/Average readings
  • Auto-Hold freezes the reading on the display
  • Auto power off and low battery indicator
  • Complete with two AAA batteries, calibration standards (one ferrous plate, one non-ferrous plate, and one standard coating plate film), wrist strap, and soft case

Specifications

Specifications Ferrous Non-Ferrous
Working Principle Magnetic Induction Eddy Current
Measuring Range 0 to 2000μm (0 to 80.0mils)
0 to 1000μm (0 to 40.0mils)
Resolution 1μm (0.1mils) 1μm (0.1mils)
Basic Accuracy
 ±4 digits (0 to 7.8mils); ±10 digits (o to 199µm)
±4 digits (0 to 7.8mils); ±10digits (0 to 199µm);
±3% (7.9 to 39.0mils); ±3% (200µm to 1000µm)
±3% (7.9 to 39.0mils); ±3% (200µm to 1000µm);
±5% (39.1 to 80.0mils); ±5% (1001µm to 2000µm)
Dimensions/ Weight 4.1×2.2×1.1″ (105x55x27mm)/ 2.82oz (80g)